HoYoverse Figure Care Guide: Cleaning and Display Tips for 2026

If you started collecting HoYoverse figures when Genshin Impact launched in 2020, you've seen the lineup grow from a dozen characters to hundreds. Today's collection might include Venti, Ganyu, and a full Star Rail squad. But even the best-crafted figure shows wear without proper HoYoverse figure care. Dust, UV rays, and handling mistakes can fade paint and loosen joints. I've been in print-on-demand merch design for over a decade, and I see these issues constantly. This guide covers cleaning, display, and storage methods proven to keep your figures collection-worthy for years.

Why Proper Care Matters for Your HoYoverse Figures

HoYoverse figures are detailed painted PVC or ABS plastic. The retail price for a standard 1/7 scale figure ranges from $60 to $150. Limited editions like the Genshin Impact Wanderer figure hit $200 or more. Without care, you lose investment and display appeal.

Plastic degrades under UV light. Sun exposure causes yellowing and brittleness within 6-12 months. Dust abrades paint if you wipe without proper technique. And humidity can cause mold or blooming (white haze) on uncoated areas.

My own collection includes a launch-day Zhongli figure. After four years on a shelf with indirect sunlight, the green accents faded to pale yellow. A UV-filtering case would have prevented that. Learning from mistakes early saves money and disappointment.

Dusting and Cleaning Techniques for Figures

Dry Dusting (Weekly)

Use a soft makeup brush or a drafting brush with natural bristles. Never use compressed air cans - the propellant can react with PVC and leave a sticky residue. Hold the brush at a 45-degree angle and flick dust away from crevices. Pay extra attention to hair strands, skirts, and weapon accessories.

For articulated figures like the Honkai Star Rail Seele figure, clean joints first. Dust buildup in joints causes stiffness over time.

Wet Cleaning (Monthly or as Needed)

Distilled water only - tap water leaves mineral spots. Dip a microfiber cloth in distilled water and wring it out completely until just damp. Wipe painted surfaces gently. For stubborn fingerprints on clear stands, use a 50-50 mix of distilled water and isopropyl alcohol (91% or higher) on a cotton swab. Test on an inconspicuous area first.

Avoid using soap or window cleaners. They can strip paint or leave a film that attracts more dust. I've seen acetone-based cleaners dissolve paint details on a Raiden Shogun figure instantly.

Cleaning Key Details

• Translucent parts (hair, ice effects): wipe with a dry microfiber first. If streaky, use a tiny drop of dish soap in water, then buff dry.
• Gold or metallic paint: these are fragile. Use a dry brush only unless absolutely necessary.
• Fabric parts (real cloth on some figures): hand wash with mild detergent in cold water, air dry flat.

Display Tips to Avoid Sun Damage and Dust Buildup

The 45-Degree Rule

Place display shelves at least 3 feet away from windows. If unavoidable, use UV-filtering acrylic cases. I recommend the Erickson beveled base cases (under $50 for small figures) or the Detolf from IKEA with added weatherstripping around the door.

Rotate figures every 3-4 months to even out any light exposure. Mark your calendar - it's easy to forget once they look perfect.

LED Lighting

Use LED strip lights with a color temperature of 3000K-4000K (warm white). Incandescent bulbs emit UV. LED emits almost none. Install lights outside the display case if possible to reduce heat buildup. Heat can soften PVC and cause leaning.

Dust Prevention

• Seal gaps in display cases with foam weatherstripping tape ($5 per roll).
• Use a positive air pressure system: intake fan with a HEPA filter blowing air into the case. This pushes dust out of gaps.
• Dust the room regularly - less ambient dust means less on figures.

Storing and Packaging Preservation

Original Box Storage

Keep original boxes in a climate-controlled space. The box art and clear plastic blister are worth keeping for resale. Store boxes flat, not stacked more than 5 high, to avoid crushing. Wrap each box in acid-free tissue or a cloth bag.

Long-Term Storage (6+ Months)

If you rotate figures, store spare figures in acid-free plastic containers. Use unbuffered archival tissue to wrap joints and delicate parts. Add silica gel packets to control humidity. Recharge silica gel in the oven at 250°F for 2 hours when the indicator changes color.

Temperature Range

Keep storage between 60°F and 75°F. Below 50°F, plastic becomes brittle. Above 90°F, it can warp. Avoid attics and garages. I keep a small thermometer/hygrometer inside my storage container - digital ones cost $10.

Common Mistakes to Avoid When Handling Figures

Holding by Delicate Parts

Never lift a figure by its weapon, hair, or base connection point. The stress can snap pegs. Always hold by the chest or abdomen. If the figure has a dynamic pose, support the legs and torso together.

Using Wrong Cleaning Products

• Do not use any product containing acetone, ammonia, bleach, or ethanol. These soften or dissolve paint.
• Avoid baby wipes - they often contain moisturizers that leave oily residue.
• Skip abrasive sponges or paper towels - they micro-scratch clear plastic.

Displaying in Direct Sunlight

Even through window glass, UV accumulates. A figure on a windowsill can show fading in 3 months. Use blinds and UV film on windows if you must display near them.

Over-Tightening Joints

If a figure leans or sagging occurs, don't force the joint tighter. Use a thin layer of clear floor wax (Pledge Future Shine) on the joint to create friction without cracking. Test on a hidden spot first.

Neglecting Humidity

High humidity (above 65%) causes mold and metal corrosion on stands. Low humidity (below 30%) can shrink plastic. Use a dehumidifier or humidifier as needed. A small hygrometer costs $10 and alerts you when levels drift.

Key Takeaways

• Use soft brushes and distilled water for cleaning. No harsh chemicals.
• Display away from windows or use UV-filtering cases with LED lighting.
• Store original boxes flat in climate-controlled space with silica gel.
• Hold figures by the torso, not delicate parts.
• Monitor humidity and temperature in your display area.

Frequently Asked Questions

Can I use a hairdryer to soften stuck joints on HoYoverse figures?

How often should I dust my HoYoverse figures?

Is it safe to display figures in a glass cabinet with lights?

Can I use compressed computer air duster to clean figures?

What should I do if my figure develops a sticky surface?